Specifications
Combining multiple tracks on another track (Bounce function)
ZOOM PS-04 43
■
Selecting the bounce target
V-take
In the default condition of the PS-04, the result of
the bounce operation will be recorded on the V-take
that is currently selected for the recording track(s).
To play back a track while bouncing onto another
V-take of that track, you can use the following
procedure to change the recording destination V-
take.
1.
From the AUDIO mode top screen
and with the recorder stopped, press
the [EDIT/UTILITY] key.
The AUDIO mode utility menu appears.
2.
Use the cursor left/right keys to bring
up the indication “BOUNCE” on the
display, and press the [ENTER] key.
3.
Use the cursor left/right keys to bring
up the indication “TAKE” on the
display, and press the [ENTER] key.
The display changes as follows.
From this screen, you can select one of the
following two settings for the bounce target V-take.
• CR (Default)
The bounce result will be recorded on the V-take
currently selected for the recording track.
•1 – 10
The bounce result will be recorded on the V-take
of the number you specify here.
4.
Turn the dial to select the bounce
target V-take.
5.
Press the [EXIT] key repeatedly to
return to the AUDIO mode top
screen.
■
Carrying out bounce recording
In this example, we will bounce the contents of
audio tracks 1 – 4 onto V-takes 10 of tracks 1/2.
1.
Set the bounce target operation to
“PLAY” and select “10” as bounce
target V-take.
For details, see the preceding section.
2.
Repeatedly press the status key 1
until the “REC” indication is shown
for track 1. Then keep pressing the
key.
3.
While still holding down status key 1,
repeatedly press the status key 2
until the “REC” indication is shown
for track 2.
In this condition, the same signal as supplied at the
[OUTPUT] jack of the PS-04 is recorded on
V-takes 10 of tracks 1 and 2.
H
INT
• When performing bouncing in stereo, the left
channel of the bounce source is recorded on
the odd-numbered track and the right channel
on the even-numbered track.
• If desired, you can also add the drum/bass
track signal and the input signal to the
bounced mix.
TAKE
TAKE
CR