Specifications

Quick Guide
34 ZOOM PS-04
3. Use the cursor up/down keys to bring up the following screen.
This screen lets you select the V-take for the track.
4. Turn the dial to select the number of the V-take that was selected as bounce
target (V-take 10 in the above example).
5. Use the same procedure to select the V-take for the other track.
6. Set the track parameters as follows, so that the sound of the bounce target
V-takes can be monitored without coloration.
7. When the setting has been made, press the [EXIT] key to return to the AUDIO
mode top screen.
H INT
If required, you can also link the parameters of the two tracks (→ p. 58).
8. Raise the faders of the bounce target tracks, and slide the other faders fully
down.
H INT
When the fader setting value is 100, the recording level and playback level are identical.
(The current fader value can be checked with the track parameter FADER.)
Track parameter SEND HI-EQ LO-EQ PAN
Track 1
OFF OFF OFF L100
Track 2
OFF OFF OFF R100
V-take numbe
r
Track number
TR
TR
1 -
1