Specifications
Quick Guide
22 ZOOM PS-04
Shortly after selecting an algorithm, the name of the patch (effect program) active in that algorithm
will be shown.
3.
Turn the dial to select the patch.
For information on the various patches that are available, see the list in the last section (→ p.116)
of this documentation.
H
INT
• You can also edit a patch to change its sound or intensity (→ p. 87).
• The recording level may change, depending on the selected patch. If the signal after
effect processing sounds extremely distorted, adjust the patch level (insert effect output
level) (
→ p. 87).
4.
Press the [EXIT] key to return to the AUDIO mode top screen.
2-3
Selecting a track and starting to record
Select the track on which to record the signal processed by the insert effect. In this example, we will
select track 1 for recording.
1.
From the AUDIO mode top screen, press status key 1.
While the AUDIO mode top screen is shown, you can use status keys 1 – 4 to select a recording
track. When you press status key 1, track 1 goes into recording standby mode, and the
corresponding "REC" indication appears. In this condition, the input signal is sent to the track via
the insert effect.
H
INT
• If the [LINE IN] jack has been selected as input source and only track 1 was selected as
recording track, the left/right signal will be mixed and sent to the track as a mono signal.
• To record the signal from the [LINE IN] jack in stereo, or to retain a stereo effect
produced by the insert effect, set two tracks simultaneously to the recording standby
condition (→ p. 55).
2.
Use fader 1 to adjust the monitor level of the signal to record.
N
OTE
• When the recording track has been selected, the input signal will be sent to the stereo
mix via the corresponding track. By adjusting the fader for the respective track, you can
adjust the monitor level.
• If no recording track has been selected, the input signal will be sent directly to the stereo
mix. Adjusting faders 1 – 4 will have no effect on the monitor level.
Patch name
VO-STD
VO-STD
0