Specifications

Let's Record
14 ZOOM PS-04
6. To adjust the track recording level, operate fader 2.
While this screen is shown, you can use fader 2 to adjust the recording level for the signal from the
[INPUT] jack. When the adjustment is complete, press the [EXIT] key.
H INT
If the topmost segment (rectangular block) of the level meter comes on when you play your
guitar loud, reduce the recording level setting.
7. Use the status keys to select the recording destination track.
Above the level meter, the indication "REC" appears for the track that has been set to recording
standby.
8. To start recording, hold down the [REC] key and press the [R/P] key.
A precount of 4 clicks is heard, and recording starts. Play your guitar to record.
9. To stop recording, press the[R/P] key once more.
The [REC] key and [R/P] key goes out.
10. To check the recording, press the [U] key and then press the [R/P] key.
11. To cancel the recording standby condition, press the status key 1 again so that
the "REC" indication goes out.
RECLVL
RECLVL
100