Instruction manual

8
2. Confirm that the display settings of your
computer are set to a high color mode (16,24 or
32 bit)
.
3. Click on
START->PROGRAMS->VALCam
Flash
and start the application.
4. The
VALCAM ID
capture control box will appear.
If you receive an error message or the
capture control box does not appear
displaying live video, consult the trouble
shooting guide.
Camera motion controls
1. Press the
+
key next to the numeric key pad, the
camera will zoom in. Release the
+
key and the
camera will stop zooming. To zoom out press
the
–
key next to the numeric keypad. Release
the
–
key to stop the action.