Instruction manual

6
3. Attach the connector on the
flash unit
to
the matching connector on the
Zoom Camera
.
4. Locate the
multi-cable
and attach the
brown/black
25 pin D-sub connector to the
matching connector on the
Zoom Camera
.
Computer connections
1. Attach the
gray
S-video connector on the
multi-
cable
to the matching S-video connector on the
VideoVue PCI
image capture card installed in
the computer. Use caution to verify that the
connector is properly oriented before inserting.
DO NOT FORCE THE CONNECTION.
2. Attach the
orange
connector on the
multi-cable
to the matching connector on the
flash
card.
3. Attach the female DB-9 connector on the
multi-
cable
to an available serial port connector on
your computer.
The
VALCam ID
hardware is now installed.
Software Installation
Win 2000 – Win 98SE - Win Me
1. Before turning on the computer, verify that all
hardware (camera, cables and capture card) has
been installed according to the directions.
2. Locate the installation diskette for your operating
system
.
Start the computer.
Win 95
or
Win 98 First Edition
is not
compatible.