Instruction manual

14
4. Click the or buttons on the main screen
to adjust the live preview brightness level.
5. Adjust the
Red
and
Blue
controls.
If the image is yellow increase
Blue
and
decrease
Red.
If the image is green increase
Red
and increase
Blue
.
Note: These controls are only available on the latest
versions of the VALCam hardware
.
6. Adjust the
Cam Sharp
control for optimal image
sharpness. Usually a value between
6
and
15
will result in the best results. Its recommended to
print cards at different Cam Sharp levels to
determine the best value.
A value of
7
is default.
Note: A higher value might be needed for the best
print results as opposed to the best image on the
monitor.
Note: This control is only available on the latest
versions of the VALCam hardware.
7. Adjust the
Color Level
control for optimal color
intensity. If this value is too low, images will
appear pale. If this value is too high colors will
appear too intense.
The default value is
100
for non-flash captures.
Note: This control should be adjusted for best print
results.
8. Adjust the
Flesh Tone
control for optimal color
hue. The extreme ranges of this control will
change the image from green to red. The default
value is
0
, but may need to be changed
depending on the ambient room light.