Instruction manual

11
camera is changed. The setting is saved to an
INI
file (
VALPCIZOOM.INI
) and is saved
between sessions.
NOTE: When the Use Flash Yes radio button is
enabled, the parameter changes take place only
when the image is captured. The live preview image
will not change. To adjust the live preview, select the
Use Flash No radio button.
Testing Image Capture Without Flash
1. Click the
Use Flash No
radio button box.
2. Adjust the
Brightness
buttons for proper
illumination.
Note: All image parameter changes are immediately
viewable in the live display window with the flash
off.
3. Hit the
Capture
button to acquire an image.
4. When you are satisfied with the image quality,
click the
Save
button and the image will be sent
to your application or put on the Window’s
clipboard.
5. When you are satisfied with the image quality,
click the
Save
button and the image will be sent
to your application or put on the Window’s clip
board.