Instruction manual

2. Adjust the Camera motion controls to frame the

live image.

3. Use the

Zoom

controls to zoom in to the subject.

It is always recommended to zoom in as tight

as your image composition will allow for the

highest image quality.

4. Click the

Capture

button. The live preview will

become dark and the

flash unit

will trigger. The

captured image will appear in the

VALCam

window. If the Flash does not fire, verify that the

flash is turned on and connected properly.

5. The image will probably be too bright or too dark

depending on the subject distance from the

camera. Click the or buttons to increase

or decrease the flash Iris level setting. The

values range from 2 to 30. In most cases a value

between 12 and 24 will suffice. The closer the

subject is to the camera the lower the value.

Take as many captures as necessary to find an

optimal value. This setting will not need to be

adjusted unless the subject distance to the