User manual

To access the Port Triggers page:
1 Click Router in the menu tab.
2 Then click the Advanced/Port Triggers submenu.
3 To add a new rule, click on the Create Rule button.
Figure 20 shows an example of the menu and Table 20 describes the items you can
select.
Figure 20. Example of port Triggers Page
To activate a port trigger
1 Enter the trigger and target ports range for the Internet traffic to forward to.
2 Select the forwarding protocol(s).
3 Enter a name for your port triggering rule.
4 Select ON for the Enable box to enable Port Triggering.
5 Click the Apply button to activate the forwarding rules.
86