User manual

Table 8. Bridging Menu Option

Option Description
Wireless
Bridging
Select to enable or disable wireless bridging.
Remote Bridges
Table of remote bridge MAC addresses authorized to establish a
wireless bridge. Up to 4 remote bridges may be connected.
Typically, you will also have to enter your AP’s MAC address on the
remote bridge. The Cable Modem/Router’s wireless MAC address
can be found on the Wireless Interfaces page.
Access Control
This page allows you to control which wireless clients can access your wireless network.
It also provides information about wireless clients connected to your access point.
To access the Access Control page:
1 Click the Wireless menu tab.
2 Then click the Access Control submenu.
Figure 9. Example of Access Control Page shows an example of the menu and Table 9
describes the items you can select.
63