User manual

7 We will need to setup 5 triggers for World of Warcraft. The first rule would cover ports
1119-1120. Enter 1119 in the Trigger Start Port field and 1120 in the Trigger End
Port field. Since these ports are used to send data both directions enter 1119 in the
Target Start Port and 1120 in the Target End Port.
8 Select TCP in the Protocol drop down menu since these ports use TCP.
9 Enter a name for this rule, for example WOW1. Select ON to enable, then click
Apply. Your new rule will appear in the table.
10 Repeat steps 7-9 for the next rule. In this case only one port is used, 3724. Enter
3724 in the Trigger Start/End Port and Target Start/End Port fields.
11 Repeat steps 7-9 for the remaining ports that need to be opened. When you are
complete the table should look like this:
38