User manual

To disconnect from the current network:
1 From the Windows Start menu, select Connect to.
2 In the Disconnect or Connect to another network dialog box, select the current
network and click Disconnect.
3 In the Are You Sure? message box, click Disconnect again.
4 In the next dialog box, you can connect to another network or click Close to complete
the disconnect procedure.
Connecting a Windows XP Computer with Built-in
Wireless Capabilities

1 On your Windows desktop, click the Wireless Network Icon in the System Tray.
2 If available, click on Zoomxxxx_5G to connect to your Cable Modem/Router’s 5 GHz
network. If you do not see Zoomxxxx_5G than most likely your wireless adapter
does not support the 5 GHz network, so go ahead and click on Zoomxxxx. In both
cases, xxxx are the last 4 characters of the cable modem CM MAC address. You can
find Zoomxxxx printed on the bottom label of your Cable Modem/Router. In the
unlikely event that you changed the SSID from the default, select your new SSID.
3 When prompted to enter your Network Security Key, enter your Pre-Shared Key
(Security Key/Password) and click Connect. Your Security Key/Password can be
found on the bottom label of your Cable Modem/Router.
4 Test your wireless connection. Open your computer’s Web browser and try to
connect to a familiar Website. If you are unable to connect, make sure you followed
the instructions. If you did, please see
Appendix A: Troubleshooting Tips.
Your computer is now connected to your wireless network. If you want to connect
additional computers or devices, follow the instructions for your device by starting at the
first page of this chapter.
To disconnect from the current network:
1 On your Windows desktop, click the Wireless Network Icon in the System Tray.
2 Click View Wireless Networks button.
3 Select your SSID (wireless security name) and click Disconnect.
21