User manual

Table 38. Diagnostics Menu Option
Option Description
Select the utility for troubleshooting.
Utility
Enter the required parameters to perform diagnostics.
Parameters
Click this button to begin diagnostic after making any changes to the
default parameters.
Start Test
Click this button to abort Ping diagnostics.
Abort Test
Click this button to clear the results table.
Clear Results
Backup/Restore Settings

The Backup page allows you to save the current Cable Modem/Router configuration
settings to a local PC. You can then later restore these settings if you need restore a
particular configuration, or to recover from changes you may have made that have had
an undesirable effect.
To backup the current configuration:
• Click Backup and follow the prompts.
To restore a previous configuration:
• Click Browse and use the navigation window to locate the file.
(Usually GatewaySettings.bin, unless you rename it before saving.)
Once the file has been located, click Restore to restore the settings.
• Note: Once the settings are restored, the device will reboot.
To access the Backup/Restore Settings page:
1 Click the Router menu tab.
2 Then click the Management/Backup Settings submenu.
129