User manual

Table 30. ToD Filter Menu Option
Option Description
Enter a name for the time access policy and click
Add New Policy.
Time Access Policy
Configuration
Select a policy from the drop-down list. Click the
Enable checkbox to enable this rule.
Time Access Policy List
Days to Block
Click the checkboxes of the days that this rule
applies to.
Time to Block
Click the checkbox All Day to define this policy to
block Internet access for the entire day of each day
selected – or enter the start and stop times of the
periods you want to block access.
Note: If you want to allow access for only a part of
the day, you may need to create and apply two
time policies. See example below.
Click enable if you want to block specific ports
Ports to Block
This is first port you want to block.
Port Start
This is the end of the range of ports you want to
block. If you only want to block one port enter the
port number in both the start and end fields.
Port End
Example of Time to Block – create and apply two time policies to allow access
Mon – Fri 7:00pm – 9:00pm:
Time Policy Name Days to Block Time to Block
Weekday I Mon – Fri 12:00am – 7:00pm
Weekday II Mon – Fri 9:00pm – 12:00am
Select both Weekday I and Weekday II at User/Time Access Rule.
110