Operation Manual

93
Troubleshooting
Cannot select or use the device
• Confirm that the is connected to
the computer correctly.
• Conrm that
is set to OFF on
the
.
• Quit all the software that is using the
, and turn the off and on
again.
• Reinstall the driver.
• Connect the
directly to a USB
port on the computer. Do not connect it
through a USB hub.
Sound skips during playback or recording
• If you can adjust the audio buffer size of
the software that you are using, increase
the buffer size.
• Connect the
directly to a USB
port on the computer. Do not connect it
through a USB hub.
• Turn the automatic sleep function and oth-
er computer power saving settings off.
Cannot play or record
• Confirm that the is connected to
the computer correctly.
• Confirm that the Sound setting of the
computer you are using is set to "ZOOM
L-12 ".
• Confirm that
is set for input and
output in the software that you are using.
• Conrm that the
, is lit red and
the level meters are lit for channels 9/10 or
11/12.
• Quit all the software that is using the
, and disconnect and reconnect the
USB cable connected to the .
Audio interface