Operation Manual

31
Mixer
Setting signals output from MONITOR OUT A–E
The MONITOR OUT A–E jacks can be set to output the same mix as the MAS-
TER OUT or different mixes.
MONITOR OUT
switches
MASTER button
A–E buttonsChannel faders
Adjusting the MONITOR OUT A–E mixes
1. Press an – button to select the output to mix.
The selected output button lights and operation of all the channel faders is enabled.
NOTE
The level meters show the fader positions. If the actual channel fader position differs from the channel fader
position shown, the volume will not change until the fader is moved to the same position.
2. Use the channel faders to adjust the volumes.