Operation Manual

14
Names and functions of parts
RECORDER section
1
Slate mic
This is a built-in mic for recording comments.
This mic input is active while the SLATE button
is being pressed.
The input channel can be set to channels 1–12,
MASTER, or all channels. (
→
P. 55)
2
SLATE button/indicator
This activates the slate mic.
The slate mic is activated while this button is
being pressed and its indicator is lit.
3
Display
This shows the recorder status and MENU
screen.
4
MENU button
This opens the menu.
5
Selection encoder
Use this to change menus and values and to
move between items.
Operation Result
Turn when main re-
corder screen open
Searc
h forward or backward
in one-second increments.
Push when main re-
corder screen open
This sets a mark.
Turn when menu
open
Move between parame-
ters and change values.
Press when menu open Conrm parameter value.
6
TEMPO button/indicator
This sets the tempo of the metronome built into
the recorder.
Press this button to make the recorder detect
the tempo from the average value.
During recording and playback, the indicator
blinks at a tempo of 40.0–250.0 bpm.
See P. 49 for metronome settings.
7
STOP button
This stops the recorder.
8
PLAY/PAUSE button/indicator
This starts and pauses recorder playback. The
indicator shows the playback status as follows.
Status Explanation
Lit green The recorder is playing back.
Blinking green Playback is paused.
9
REC button/indicator
This puts the recorder in recording standby. The
indicator shows the recording status as follows.
Status Explanation
Lit red The recorder is recording or in
recording standby.
Blinking red Recording is paused.
!
REW button
Press to move to the previous mark.
If no mark is set, this moves to the beginning.
Press this button when at the beginning to move
to the previous project.
Press and hold to search backward. (The longer
you press, the faster the speed becomes.)
"
FF button
Press to move to the next mark.
If it is the last mark, this moves to the end of the
le. Press this button again to move to the next
project.
Press and hold to search forward. (The longer
you press, the faster the speed becomes.)
#
OVER DUB button/indicator
Status Explanation
Lit (ON) Record by overwriting into the
current project folder.
Unlit (OFF) Create a new project folder and
make a new recording.
①
②
③
⑨
⑫
④
⑤
⑧
⑦
⑩
⑥
⑪