Operation Manual
11
Names and functions of parts
Send effect (SEND EFX) section
1
Effect type list
This is the list of the built-in effects.
The name of the currently selected effect lights.
It blinks when being selected.
If some time passes without a different effect
being selected, the previously selected effect
will remain selected.
2
TYPE knob
Use to select the built-in effect.
Turn this knob to select the effect type, and
press it to conrm.
3
Parameters 1 and 2
Use these to adjust the parameters for the se-
lected effect.
See P. 95 for the parameters of each effect.
4
EFX RETURN MUTE button
This mutes or unmutes the signal sent from the
built-in effect.
To mute the signal, press this button to light it.
5
EFX RETURN level meters
These show the levels of the signals sent from
the built-in effect to the master bus after adjust-
ment by the EFX RETURN fader. Their range is
from −48 dB to 0 dB.
6
EFX RETURN fader
This adjusts the levels of the signals sent from
the built-in effect to the master bus in a range
from −∞ dB to +10 dB.
NOTE
If the actual channel fader position differs from the
channel fader position recalled using the scene
function, for example, the level meters will show
the recalled fader position.
①
②
③
④
⑤
⑥