Operation Manual

10
Names and functions of parts
SCENE section
③
①
②
④
⑤
1
ON button
Press this button, lighting it, to use the scene
function
2
RESET button
Press this button to reset the current mixer set-
tings to the factory defaults.
3
1–9 buttons
Use these buttons to select the scene to use to
save the current mixer state and to load saved
scenes.
If the current mixer settings match the settings
of a scene, the corresponding number button
will light.
This unit can save up to 9 scenes.
4
RECALL button
Use this button when loading scenes saved to
buttons 1–9.
When this button is pressed, buttons 1–9 will
blink if they have saved scenes and be unlit if
they do not. To recall a saved scene, press a
blinking button between 1 and 9. To cancel recall-
ing a scene, press the RECALL button again.
5
SAVE button
Use this button when saving the current mixer
settings to a scene.
When this button is pressed, buttons 1–9 will
blink if they have saved scenes and be unlit if
they do not. To save a scene, press a button be-
tween 1 and 9 to save it to that number. To can-
cel saving a scene, press the SAVE button again.