User Manual

1
Press.
2
Select TOOL and press.
3
Select METRONOME and press.
4
Set each item.
079 080
Operations / Metronome (METRONOME) Operations / Metronome (METRONOME)
3-02 Metronome (METRONOME)
The metronome has convenient functions such as a pre-count.
CLICK PRE COUNT
TEMPO SOUND PATTERN LEVEL
This setting turns the metronome o or on dur-
ing recording, playback or both. This setting
must be made before recording or playback.
Set the count used before recording starts.
This cannot be set if PRE REC or AUTO REC
is ON.
Count of SPECIAL
Default: 120.0Select the condition
OFF
---Recording/playback
---Only when recording
---Only when playback
Set the count to OFF, 1-8
beats or SPECIAL.
You can set this between
40.0 and 250.0 BPM in 0.1
increments.
Set the metronome speed.
Default: bell
You can select BELL,
CLICK, STICK, COWBELL
or HI-Q.
Set the metronome tone.
Default: 4/4.
You can this to 0/4 (no
accent), 1/4 – 8/4 or 6/8.
Set the pattern of the metronome.
You can select from eleven
levels.
Set the volume of the metronome.
NOTE:
The metronome starts at the beginning of recording and playback. If you start in the
middle of a song or track, the metronome beats may not be in sync with the song.
Select Select Select Select
Select
Select Select
Select SelectSelect Select Adjust
Press the MENU button for more
than 2 seconds, and start operation
from the top screen.