User Manual
7
Press the desired punch out
point.
8
Rewind to the le beginning
(counter at 0) or to a position
before the punch in point.
+
9
Press to put TRACK 1 into recording standby.
10
Press to start TRACK 1 playback/recording.
→●■
060
Operations / Settings/recording: Automatic re-recording (PUNCH IN/OUT)
MTR mode only
Set the recording end (punch out) point
Re-recording
HINT:
• You can set the punch in/out points while stopped by using
the counter. First set a time and move the cursor to the
punch in/out icon, and then press the DIAL.
• After setting the punch out point in step 7, pressing the
DIAL again will cancel all the settings.
NOTE:
Setting available only for
OVER WRITE recording in
MTR mode.
PUNCH OUT setting
conrmed
Part re-recorded
Punch in
Start Stop
Punch out
PLAY REC PLAY
1 When in punch in/out mode,
the track button lights during
recording and blinks in record
-
ing standby.
When the track reaches the
punch in point, the REC light will
turn on and recording will start.
When the track reaches the
punch out point, the light will
blink and recording will stop.
Ref.
☞
Specifying a
counter time
P.102