User Manual

1
Connect H4n Pro to computer
with USB cable.
2
Press on the top screen.
3
Select USB and press.
4
Select STORAGE and press.
033
Setup / Using as a USB SD card reader
6-6 Setup: Using as a USB SD card reader
NOTE:
• Before physically unplugging the
USB cable (and H4n Pro) from
the computer, be sure to use
the “Safely Remove Hardware”
function on the computer rst.
Unplugging the USB cable (and
H4n Pro) without doing this could
damage les.
• Compatible operating systems:
Windows Vista and newer
Mac OS X (10.6 and newer)
HINT:
USB bus power
USB bus power is a way to supply
power from a computer through the
USB cable.
Connecting the H4n Pro by USB
when its power is o causes it to
automatically start up and show the
USB menu.
SD card reader use
• Use les recorded by the H4n
Pro on your computer.
• Use audio les created on a
computer on the H4n Pro.
When you use the H4n Pro as an SD card reader, make the following settings.
USB
Connect H4n Pro to
computer with USB cable.
Connection complete
Power ON
already
Power OFF
H4n Pro starts up using USB
bus power, and USB setting
screen opens