User Manual
MTR MODE STEREO/4CH/STAMINA MODE
020
Button operations / Using TRACK 1–4 buttons
4-3 Using TRACK 1–4 buttons
TheofTRACK1-4buttonshavedierentfunctionsdependingontheMODE.
Front
TRACK 1-4
Switch between track recording and playback.
Move to the
FOLDER SELECT menu
Move to the FILE menu
Move to the SPEED menu
(only STEREO MODE)
Move to the REC FORMAT menu
(STEREO MODE, 4CH MODE)
These operations are not available during
recording and playback.
Make track and the input source settings
When you start recording, press the track number you want to
record and the track becomes Recording Standby status. That
track button will then become illuminated.
After selecting the track, use the input source buttons to select
the input for that track. Using the INPUT button you can record
in mono, stereo or a combination of both.
Selecting one track
Selecting two tracks
Same for tracks 2-4
Same for tracks 3 and 4
Note: These operations are not possible
during recording and playback.
These are the four possible
input selections.
For stereo input
select MIC or 1
and 2
For mono input select
either 1 or 2
HINT:
When stereo link active
When tracks are stereo-linked, pressing the
button for one track will have the same eect
on the linked track.
Ref.
☞
Stereo link
P.058