Quick start Guide

14
Using as an audio interface
1.
Press when the Home Screen is open.
2.
Use and to select “USB”, and press .
3.
Use and to select "Audio I/F", and press .
4.
Use and to select the mode or type of connected device, and press .
Setting Explanation
Stereo This sends a stereo mix of input signals 1–4 to the computer.
4ch Ambisonics
This sends tracks 1–4, which are converted from input signals 1–4, as sep-
arate signals to the computer.
Stereo (iOS) This sends a stereo mix of input signals 1–4 to the iOS device.
5.
Use a USB cable to connect the with the computer or iOS device.
6.
When nished with the USB connection, press on the Home Screen.
7.
Use and to select “Exit”, and press .
8.
Use and to select “Execute”, and press .
9.
Disconnect the USB cable from the and the computer or iOS device.
• When connected to a computer, the recorder will operate on USB bus powered.
• Use batteries when connected to an iOS device.
HINT