User guide
Zoom User Guide
The Zoom Handy Recorder H2 (referred to as a ‘zoom’) is an SD card based digital
audio recorder. Below are 8 quick steps for recording followed by more detailed
explanations of how the zoom works.
8 quick steps for recording
1. Turn on the zoom by sliding the [POWER] switch on the left side
panel
2. If you’re using an external mic or recording sound from another
source, plug that in
3. If you’re using the internal mic, activate the mic you want to use - Front 90° /
Surround 2CH / Surround 4CH / Rear 120° using the arrow keys on the front
panel
4. Put your headphones on!
5. Press the [REC] button in the centre of the front panel. This will
put the zoom in cue mode. You’ll be able to hear what the
recording will sound like but you’re not recording anything yet.
Check you levels and adjust if needed.
6. Press the [REC] button again. Now you are recording.
7. When you’re finished press the [REC] button one more time to stop
8. Use the USB cable to transfer the files off the zoom to a computer for editing.
Built In Mics
The built-in mics allow you to record sound using the front or rear panel of the zoom or
both panels at once. The front panel mic covers a 90° angle and the rear panel mic
covers 120° angle. Choose the side that is best suited for your recording.
● Solo vocals or a single instrument (Front 90°)
Point the front panel of the zoom towards the sound source. The
90° angle will help exclude unwanted sounds.