Specifications

gf17
17
Manual Robin HV / Robin CV ENG - v. 3.0.1
We assume here that the network supports DHCP (‘Dynamic Host Configuration Protocol’); if so, all
settings such as the IP addresses, netmask, gateway and DNS are automatically populated.
DHCP is a standard setting in the Robin CV and Robin HV. This option will suffice in 99% of all
cases. However, on occasions the network may not support DHCP. If so, the network details must
be set manually.
If the Robin isn’t activated yet during login, you will receive a notification to activate the Robin.
Follow the activation instructions or click -Skip- to continue the configuration.