Specifications

gf14

Manual Robin HV / Robin CV ENG - v. 3.0.1

4 System installation

4.1 Requirements prior to installation

 Network connection with PoE (Power over Ethernet is used to power the door intercom; the

power supply must be 802.3af compatible).

 PC with web browser.

 The following web browsers are supported:

- FireFox

- Safari. Safari running under MacOS 10.8 is not supported

- Google Chrome

 USB stick with the ‘Robin Discovery Utility’ software (supplied)

 Network with or without DHCP support

(DHCP support is recommended)

 Network cable, the cable may not be longer than 100 metres

 Optional - Two-core cable for door switch operation

4.2 Connecting the Robin to a network

 Connect the Robin to the network via the network connection socket on the rear.

 The Robin will now boot. This can take up to 60 seconds.

! Note: The length of the Ethernet cable may not exceed 100 metres. This is a limit of the Ethernet

standard. !

! Note: Internet Explorer can be used for the base conﬁguration of the Robin, but can’t be used

for the ‘AGC and the ‘Motion’ settings. This is because Internet Explorer doesn’t support ‘Motion

JPEG’. !