Specifications

gf12

Manual Robin HV / Robin CV ENG - v. 3.0.1

3.3 Tools and materials required for mounting

The following are required when mounting the Robin CV:

 Drill

 Marking pencil

 General tools

 Mounting bracket (supplied)

 Allen key (supplied)

 Screws (supplied)

 6 mm plugs (supplied)

3.4 Mounting instructions

Follow the step-by-step plan described below for problem-free mounting of the Robin CV.

Step-by-step plan:

1. Position the base of the mounting bracket against the wall or ceiling

2. Mark the holes of the mounting bracket

3. Drill two holes and insert the plugs

4. Mount the mountin bracket to the wall or ceiling

5. Using the Allen key, loosen the screws on the joint points

6. Attach the Robin CV to the mounting brackets

7. Position the Robin CV into the desired position and tighten the screws on the joint points

8. Attach the ethernet cable to the Robin CV

9. Optional - Attach the wires for the relay switch

After mounting the Robin CV it can be necessary to optimise the focus of the video image.

Do this by removing the glass by turning it counter clockwise. With the glass removed, turn the lens

to get the desired focus. After that, screw the glass back onto the unit.