Specifications

gf10
10
Manual Robin HV / Robin CV ENG - v. 3.0.1
2.5 Connecting the Robin HV
Connectors on the back of the Robin HV
You will find the following connectors on the back of the Robin HV:
Ethernet connector
External power
External relay 1
External relay 2
USB port
External hardware input
10/100Mb Ethernet connector
In case of a standard Ethernet connection (no Power
over Ethernet), connect an external power supply to
this terminal. (48V DC)
This is a passive relay switch -Normaly Open- (no
power)
This is a passive relay switch -Normaly Open- (no
power)
The USB poort is for future use
The external hardware input consists of one
‘Common’ connector and four inputs. The inputs are
activated by connecting the ‘Common’ with input
one, two, three or four. The ‘common’ can be used
for more than one input