Specifications

gf9
9
Manual Robin HV / Robin CV ENG - v. 3.0.1
2.3 Tools and materials required for mounting
The following are required when mounting the Robin HV:
 Core drill, 152 mm in diameter
 Anti-theft Allen key (supplied)
2.4 Mounting instructions
Follow the step-by-step plan described below for problem-free mounting of the Robin HV.
Step-by-step plan:
1. Remove the ceiling plate that will be used for mounting the Robin HV from the ceiling
2. Using the core drill, drill a hole in the ceiling plate
3. Check if the housing of the Robin HV fits the hole in the ceiling plate
4. Fit the modified ceiling plate back in the ceiling and make sure the Ethernet cable can be
reached through the hole
5. Connect the Ethernet cable to the Robin HV.
6. Optional - Connect the cables of: the relay contacts and the external inputs
7. Mount the Robin HV in the ceiling plate
8. Tighten the anti theft screws with the supplied Allen-key. The Robin HV has a build-in
system that will tighten the unit in the ceiling plate. Tighten every screw until you notice that
the unit grips in the ceiling plate
After mounting the Robin HV it can be necessary to optimise the focus of the video image.
Do this by turning the lens. For your convenience you can use the supplied focus adjustment tool.