Manual

Appendix C: Setting Up an AdHoc Network 43
9
99
9 When a confirmation message appears, click
OK
to change the
operating mode. Another message will appear letting you know
that it may take a few moments while the unit resets itself and
changes its mode. Click
OK
. (Once the Game Point! reboots
itself, you will be prompted to log into the
Web Management
Interface
again.)
10
1010
10 Click
Wireless
in the left navigational menu, then click
Settings
. Enter an
SSID
for the AdHoc network. Then
enter a
channel
. Click
OK
when asked to confirm this
choice. (For information about using the
Wireless
Settings
page, see page 25.)
11
1111
11
Click
LAN
in the left navigational menu, then click
LAN
Settings
. Enter
10.0.0.201
in the
IP Address
boxes. This
is now the IP Address of the Game Point! Device 1. Keep
the default
Subnet Mask 255.255.255.0
.
12
1212
12 Click the
Logout
icon at the top right of the screen, then
close your Web browser.
13
1313
13 Unplug the Game Point! Device 1 from your computer.
Plug in Game Point! Device 2.
14
1414
14
Open a Web browser, type
10.0.0.200
in the address bar,
and then press
Enter
. (This is the default IP address of the
Game Point! Device 2.)
15
1515
15 Repeat steps 5-9 then continue with step 16.
16
1616
16 Click
Wireless
in the left navigational menu, then click
Settings
. Enter the
SSID
of the network that you entered
for the Game Point! Device 1. Then enter the same
channel
. Click
OK
when asked to confirm this choice.
17
1717
17 Click
LAN
in the left navigational menu, then click
LAN
Settings
. Enter
10.0.0.202
in the
IP Address
boxes. This