Effect Types and Parameters

22 23
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ PEDAL ]
PDL PHSR The expression pedal controls the modulation frequency of this phaser.
★
Rate Sets the speed of the modulation. 1 – 50 P
Depth Sets the depth of the modulation. 0 – 100
RESO Sets effect resonance. 0 – 100
Color Sets the tone of the effect type.
4 STG,
8 STG,
INV 4,
INV 8
PDL Delay The expression pedal controls the delay input level of this effect.
InLvl Adjusts the delay input level. 0 – 100 P
Time Sets the delay time. 1 – 3000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
PDL Rev The expression pedal controls the reverb input level of this effect.
InLvl Adjusts the reverb input level. 0 – 100 P
PreD Adjusts the delay between input of the original sound and start of the reverb sound. 1 – 100
Decay Sets the duration of the reverberations. 1 – 30
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
OSC Echo The expression pedal controls the delay oscillation of this effect.
★
OSC Adjusts the delay time and feedback. 0 – 100 P
T-Min Adjusts the delay time when the pedal is at minimum position. 19 – 500
T-Max Adjusts the delay time when the pedal is at maximum position. 19 – 500
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
VoiceWah This effect can make a guitar sound like a human voice.
★
Vowel Adjusts the emphasized vowel. 0 – 100 P
PTTRN Sets effect pattern. A – C
Voice Adjusts the vowel sounds. 0 – 100
Mode Sets the sound style. STEP, SOFT
PDL Roto Simulates a rotary speaker.
★
Mode Sets the rotary mode. SLOW, FAST P
Drive Adjusts the amount of amplification from the preamp. 0 – 100
BAL Adjusts the balance between the horn (high frequencies) and the drum (low frequencies). 0 – 100
VOL Adjusts the volume. 0 – 100
P-BitCRSH This effect creates a lo-fi sound.
★
SMPL Sets sampling rate. 0 – 50 P
Bit Sets bit depth. 4 – 32
Tone Adjusts the tone. 0 – 10
BAL Adjusts the balance between original and effect sounds. 0 – 100
PDL FLNGR The expression pedal controls the emphasized frequency of this flanger.
★
FREQ This sets the emphasized frequency. 0 – 100 P
RESO Sets effect resonance. -10 – 10
HiDMP Adjusts the treble attenuation of the effect sound. 0 – 10
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100