Effect Types and Parameters

20 21
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ DELAY ]
TapeEcho3 This tape echo effect models the MAESTRO ECHOPLEX EP-3.
★
Gain Adjusts the gain. 0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
Time Sets the delay time. 10 – 10 0 0
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
RecLv Adjusts the volume recorded to the tape. 0 – 100
ICE Delay This effect combines pitch shifting and delay.
★
INTVL Sets the pitch modulation amount for the audio slices. -OCT – 2 OCT
Time Sets the delay time. 60 – 980
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
SlwAtkDly This effect combines slow attack and delay.
★
Swell Adjusts the attack time. 1 – 50
Time Sets the delay time. 1 – 1900
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
SoftEcho This echo has a soft tone.This echo effect allows the use of modulation.
MOD Turns modulation ON or OFF. OFF, ON
Time Sets the delay time. 19 – 581
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
[ REVERB ]
Air This effect reproduces the ambience of a room, to create spatial depth.
★
Size Sets the size of the space. 1 – 100
REF Adjusts the amount of reflection from the wall. 0 – 10
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
Room This reverb effect simulates the acoustics of a room.
PreD Adjusts the delay between input of the original sound and start of the reverb sound. 1 – 100
Decay Sets the duration of the reverberations. 1 – 30
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
Hall This reverb effect simulates the acoustics of a concert hall.
PreD Adjusts the delay between input of the original sound and start of the reverb sound. 1 – 100
Decay Sets the duration of the reverberations. 1 – 30
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
HD Hall This is a dense hall reverb.
PreD Adjusts the delay between input of the original sound and start of the reverb sound. 1 – 200
Decay Sets the duration of the reverberations. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON