Effect Types and Parameters

18 19
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ DELAY ]
Dual DLY This effect combines 2 individual delays.
★
TimeA Adjusts the delay time of Delay A.
0 – 1490,
♩
x 6
F.B A Adjusts the Delay A feedback amount. 0 – 110
TimeB Adjusts the delay time of Delay B.
0 – 1490,
♩
x 6
F.B B Adjusts the Delay B feedback amount. 0 – 110
DlyMx Adjust the mix of the Delay A and B effect sounds. 0 – 100
BAL Adjusts the balance between original and effect sounds. 0 – 100
Depth Sets the depth of the modulation. MN-0 – ST-50
Speed Sets the speed of the modulation. 0 – 50
Pitch DLY This effect applies pitch shift to a delayed sound.
★
Pitch Sets volume of pitch shift applied to delayed sound. -12 – 12
Time Sets the delay time. 1 – 2000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
SlapBackD
This delay features a short delay time that is good for muted rhythm playing and
rockabilly.
★
Time
Sets the delay time.
When Sync is chosen, the delay time is synchronized to the tempo.
1 – 300
F.B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
SubDv
Set the note length of the delay sound.
When P-P is chosen, L/R channels output delays in quarter/dotted eighth notes respectively.
, , P-P
A-Pan DLY
This combines auto pan and delay to create the effect of the stereo image moving
cyclically.
★
Time Sets the delay time. 1 – 1500
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Link Sets the order that the auto pan and delay are connected.
PAN-DLY,
DLY-PAN
Cycle Sets the speed of the sound movement. 1/4 – 50
Width Sets the width of the sound movement. 0 – 50
Clip Adjusts the amount of waveform clipping. 0 – 10
PhaseDly This effect applies a phaser to a delayed sound.
★
Time Sets the delay time. 1 – 2000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
Color Sets the tone of the effect type.
4 STG,
8 STG,
INV 4,
INV 8
Depth Sets the depth of the modulation. 0 – 100
Rate Sets the speed of the modulation. 1 – 50
Reso Sets effect resonance. 0 – 100