Effect Types and Parameters

18 19
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ DELAY ]
Delay This long delay has a maximum length of 3000 ms.
Time Sets the delay time. 1 – 3000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
AnalogDly This analog delay simulation has a long delay with a maximum length of 3000 ms.
Time Sets the delay time. 1 – 3000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
TapeEcho
This effect simulates a tape echo. Changing the "Time" parameter changes the pitch of
the echoes.
Time Sets the delay time. 1 – 2000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
ReverseDL This reverse delay is a long delay with a maximum length of 1500 ms.
Time Sets the delay time. 10 – 1500
F. B Adjusts the feedback amount. 0 – 100
BAL Adjusts the balance between original and effect sounds. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
ModDelay This delay effect allows the use of modulation.
Time Sets the delay time. 1 – 2000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
P-P Delay This delay outputs the delay sound alternately left and right.
Time Sets the delay time. 1 – 3000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON
FilterDly This effect filters a delayed sound.
★
Time Sets the delay time. 1 – 2000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
Tail
When ON, effect sound continues even after effect is turned off. When OFF, effect sound
stops right when effect is turned off.
OFF, ON