Effect Types and Parameters

14 15
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ CABINET ]
RCT4x12
This models the sound of a Mesa Boogie Recto Standard Slant Cabinet ARMOR with
four 12" Celestion Vintage 30 speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
ORG4x12
This models the sound of an Orange PPC412 cabinet with four 12" Celestion Vintage
30 speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
DZ4x12F
This models the sound of a Diezel 412F cabinet with four 12" Celestion Vintage 30
speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
MA2x12
This models the sound of a Matchless DC-30 cabinet with 12" Customized Celestion
G12H30 and 12" Celestion G12M Greenback speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
[ MODULATION ]
Tremolo This effect varies the volume at a regular rate.
Wave Sets the modulation waveform.
TRI, TUBE,
SQR
Depth Sets the depth of the modulation. 0 – 100
Rate Sets the speed of the modulation. 0 – 100
VOL Adjusts the volume. 0 – 100
Chorus
This effect mixes a shifted pitch with the original sound to add movement and
thickness.
★
Depth Sets the depth of the modulation. 0 – 100
Rate Sets the speed of the modulation. 1 – 50
Tone Adjusts the tone. 0 – 10
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100