Effect Types and Parameters

12 13
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ CABINET ]
FD MA2x12
This models the sound of a Fender ToneMaster2x12 cabinet with two 12" Celestion
G12-80 speakers.
★
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
UK2x12
This models the sound of an early British combo amp with two 12" Celestion Alnico
speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
MK1 1x12
This models the sound of a Mesa Boogie Mark I cabinet with one 12" ALTEC 417-8H
speaker.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
MK3 1x12
This models the sound of a Mesa Boogie Mark III cabinet with one 12" Celestion Black
Shadow Speaker.
★
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
BGN4x12 This models the sound of the Bogner Ecstasy cabinet with four 12" Celestion speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
HW4x12 This models the sound of a Hiwatt SE-4123 cabinet with four 12" Fane speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100