Effect Types and Parameters

12 13
Effect Types and Parameters
G1
FOUR
/ G1X
FOUR
[ CABINET ]
MS4x12
This models the sound of a Marshall 1960 A-type cabinet with four 12" Celestion
speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
MS4x12GB
This models the sound of a Marshall 1960 B-type cabinet with four 12" Celestion
G12M GreenBack speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
MS4x12AL
This models the sound of a Marshall JTM45 offset half stack cabinet with four 12"
Celestion G12 Alnico speakers.
★
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
FD2x12
This models the sound of the Fender '65 Twin Reverb cabinet with two 12" Jensen
speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
FD-B4x10
This models the sound of the Fender '59 Bassman cabinet with four 10" Jensen
speakers.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100
FD-DX1x12
This models the sound of a Fender '65 Deluxe Reverb cabinet with one 12" Jensen
C-12K Speaker.
MIC
MIC=OFF: This tone is optimized for using amp modeling with a guitar amp.
MIC=ON: This tone is optimized for using amp modeling with headphones or monitor
speakers.
OFF, ON
D57:D421
This adjusts the volume balance between the Shure SM57 and the Sennheiser MD421.
When the MIC parameter is set to OFF, this setting has no effect.
0 – 100
Hi Adjusts volume of high frequencies. 0 – 100
Lo Adjusts volume of low frequencies. 0 – 100