Manual

3
Preparations
Supplying power
Power can be supplied using AA batteries, an L battery or USB.
■
AA batteries
1.
Loosen the screw in the battery cover on
the bottom.
2.
Open the battery cover on the bottom,
and remove the battery case.
3.
Install 4 AA batteries in the battery case.
4.
Put the case into the compartment.
5.
Close the battery cover and tighten the screw.
■
L battery
1.
Slide the battery in the direction of the
arrow while pressing it toward the re-
corder.
After loading batteries, use Menu > SYSTEM > Settings > Power Source > Type to set the correct type of
battery.
NOTE
A USB type C cable can also be connected to the USB port to operate it using AC power.
HINT