User Guide

Recording
Recording process
22
Recording process
Recording
Connect
Turn power
on (→ P.17)
Prepare before
recording
Record
(→ P.29)
Play back
and check
(→ P.49)
Check take
information
(→ P.60)
• Connect mics, instruments,
audiovisual equipment and
other devices to Inputs 1–6.
(→ P.8)
• Connect a mic capsule to the
MIC IN connector. (→ P.9)
• Press to start and
to stop recording.
• You can also set marks.
• Press to start
recording a new track.
• Press to pause
• Press to start playback
and or to stop it.
• Marks, for example, can also
be set. (→ P.139)
• Check and edit
metadata.
1. Set the SD card and file format
for recording. (→ P.23)
• Set the recording file format for each
SD card separately.
2. Select the recording tracks
(→ P.25)
• Use track keys to select. The
indicators for selected tracks light red
and you will be able to monitor input
sounds.
• Press two track keys simultaneously
to link them as a stereo track.
3. Make recording settings
• You can make other settings,
including for dual channel recording
(→ P.33), pre recording (→ P.35), low
cut filter (→ P.74) and limiter (→ P.75)
functions.
4. Adjust the input levels
(→ P.27)
• Use to adjust each input.
• The side mic level can also be
adjusted when using a mid-side mic
capsule.
Follow the process below to record with the F.
The data created for each recording occurrence is called a "take".