Specifications
61
Z-Pedal Effect Types and Parameters
#14
ChaosDLY
This chaos effect uses filter and echo.
Knob1 Knob2 Knob3
Page01
Chaos 0–100
P Time x2– P Level 0–150
Sets the depth of the filter and echo. Sets the echo time. Sets the output level.
Page02
FltOs 0–100
Sets the minimum frequency of the filter.
#15 Starship This effect makes a sound like a flying spaceship.
Knob1 Knob2 Knob3
Page01
Accel 0–100
P Power 0–100 P Level 0–150
Sets the “acceleration” of the sound
by changing the sample rate.
Sets the “power” by changing the
balance of the sound.
Sets the output level.
Page02
Reso 0–100 VLCTY 0–10
Sets the strength of the resonance
of the effect.
Sets the speed of the sound change.
#16
RNDM Talk
This talking effect changes vowel sounds at random.
Knob1 Knob2 Knob3
Page01
Speed
x2–
P Voice 0–100 P Level 0–150
Sets the speed of vowel sound
change.
Sets the quality of the voice. Sets the output level.
#17
FuzzyBack
This fuzz effect feeds back overtones when single notes are played.
The feedback sound is sustained when the Z-Pedal is shifted all the way to the right.
Knob1 Knob2 Knob3
Page01
Gain 0–100
P HRMNX 0–100 P Level 0–150
Sets the gain.
Sets the amount of feedback of the
overtones.
Sets the output level.
Page02
Depth 0–100
Sets the depth of the gain when the
pedal is pressed.
#18 Granular This effect freely granulizes the sound that is sampled regularly.
Knob1 Knob2 Knob3
Page01
Size 0–100
P Flt L100–R100 P Rate x2– , Hold
Sets the fineness of the grains. Sets the amount of filter applied.
Sets the sampling frequency. When
set to Hold, the sound is sampled
when picking occurs.
Page02
FltOs 0–100 FltRs 0–100 Level 0–150
Sets the minimum frequency of the
filter.
Sets the strength of the filter
resonance.
Sets the output level.
#19
SpaceWorm
This ring modulator creates a spacey sound.
Knob1 Knob2 Knob3
Page01
Freq 0–100
P Speed x9– P Depth 0–100
Sets the frequency of the ring
modulator.
Sets the speed of the step
waveform.
Sets the depth of the ring
modulation.
Page02
Step 2–32 Level 0–150
Sets the number of steps in the step
waveform.
Sets the output level.
#20 Custom Use this to control the parameters of other effects using the Z-Pedal.
Knob1 Knob2 Knob3
Page01
ZP-V : DEST
ZP-V : min ZP-V : max
Sets the parameter controlled by
vertical movement of the Z-Pedal.
Sets the value when the pedal is all
the way up.
Sets the value when the pedal is all
the way down.
Page02
ZP-L : DEST
ZP-L: Left
ZP-L : Center
Sets the parameter controlled by left
movement of the Z-Pedal.
Sets the value when the pedal is all
the way left.
Sets the value when the pedal is in
the center position.
Page03
ZP-R : DEST
ZP-R : Center
ZP-R : Right
Sets the parameter controlled by
right movement of the Z-Pedal.
Sets the value when the pedal is in
the center position.
Sets the value when the pedal is all
the way right.