Specifications

60
Z-Pedal Effect Types and Parameters
Z-Pedal Effect Types and Parameters
#7 TalkPDL-Z This effect can make a guitar sound like a human voice.
Knob1 Knob2 Knob3
Page01
VPosi 0–100
P HPosi 0–100 P Voice 0–100
Sets the starting position value.
After the pedal is moved, the actual
position value is used.
Sets the starting position value.
After the pedal is moved, the actual
position value is used.
Sets the voice quality.
Page02
Mode Step,Soft Tone 0–10 Level 0–150
Sets how vowel sounds change. Sets the tone. Sets the output level.
#8 TRM&PHSR
This effect allows the pedal to be used for tremolo when shifted left and phaser when
shifted right.
Knob1 Knob2 Knob3
Page01
Depth L100–R100
P TrmRt – x20 PhaRt – x20
Sets the depth of the effect. Sets the rate of the tremolo. Sets the rate of the phaser.
Page02
Wave
UP 0–UP 9,
DWN 0–DWN 9,
TRI 0–TRI 9
Color
4 STG , 8 STG ,
inv 4 , inv 8
Level 0–150
Selects the waveform used for
tremolo modulation.
Sets the type of phaser color. Sets the output level.
#9 CHO&REV
This effect allows the pedal to be used for chorus when shifted left and reverb when
shifted right.
Knob1 Knob2 Knob3
Page01
Depth L100–R100
P ChoRt 1–50 Decay 1–30
Sets the depth of the effect. Sets the rate of the chorus. Sets the length of the decay.
Page02
RevMx 0–100 Level 0–150
Sets the reverb mix. Sets the output level.
#10 FLNG&DLY
This effect allows the pedal to be used for flanging when shifted left and delay when
shifted right.
Knob1 Knob2 Knob3
Page01
Depth L100–R100
P FlgRt 0–50
DlyTm 1–2000
Sets the depth of the effect. Sets the rate of the flanger. Sets the delay time of the delay.
Page02
FlgDp 0–100 DlyFB 0–100 DlyMx 0–100
Sets the depth of the flanger. Sets the feedback of the delay. Sets the delay mix.
Page03
Level 0–150
Sets the output level.
#11 OctPitch
This effect, which is designed for playing single notes, allows the pedal to be used to change
the pitch by up to -1 octave when shifted left and up to +1 octave when shifted right.
Knob1 Knob2 Knob3
Page01
Pitch L100–R100
P Tone 0–10 Level 0–150
Sets the amount of pitch shift. Sets the tone. Sets the output level.
#12 W-Shift This effect, which is designed for playing single notes, allows the pedal to control pitch and vibrato.
Knob1 Knob2 Knob3
Page01
Pitch 0–200
P VIBRT 0–100 P Level 0–150
Sets the amount of pitch shift. Sets the amount of vibrato applied. Sets the output level.
Page02
Rate 0–100
Depth 0–100 Tone 0–10
Sets the vibrato speed. Sets the vibrato depth. Sets the tone.
#13 HotSpice This effect simulates a sitar tone.
Knob1 Knob2 Knob3
Page01
Sitar 0–100
P PitMx 0–100 P Input GtrIn,EfxIn
Sets the balance between the sitar
sound and the original sound.
Sets the volume of doubling one
octave up.
Selects the source of the input signal
used for the sitar effect.
Page02
Reso -10–10 Buzz 0–100 Sense 0–100
Sets the strength of the resonance motion. Sets the buzzing tone. Sets the sensitivity of the effect.
Page03
Level 0–150
Sets the output level.