User manual

Figure 34. SES Configuration Window - Timeout!
Finally, if the current security configuration does not meet the SES requirements of WPA-PSK
authentication with TKIP, the window will not open and the error message shown below will be
displayed.
Figure 35. Authentication Error Message
Guest Network
The Guest Network page allows you to configure a guest network. A guest network is a small
section of an organization's computer network designed for use by temporary visitors. This guest
network often provides full Internet connectivity, but it also strictly limits access to any internal
(intranet) Web sites or files.
Traditionally, you needed to use different APs to configure different Basic Service Sets (BSSs). Your
cable modem/router supports Multiple SSID which allows you to use the same access point to
provide several BSSs simultaneously. You can then assign various privileges to different SSIDs and
associated networks.
y Up to four BSSs are allowed on one cable modem/router simultaneously, one for Admin
access and three for Guest Networks.
y If you are using WEP, you must use different WEP keys for different BSSs.
y You should use different PSKs for different BSSs if you are using WPA/WPA2.
To access the Guest Network page:
1 Click Wireless in the menu bar.
2 Then click the Guest Network submenu.

77