User manual

Table 4. Diagnostics Menu Option
Option Description
Utility Select the utility for troubleshooting.
Parameters Enter the required parameters to perform diagnostics.
Start Test
Click this button to begin diagnostic after making any changes to the default
parameters.
Abort Test Click this button to abort Ping diagnostics.
Clear Results Click this button to clear the results table.
Event Log
The Event Log page shows the SNMP event log.
To access the Event Log page, click Status in the menu bar and then click the Event Log submenu.
Figure 9 shows an example of the menu and Table 5 describes the items you can select.
Figure 9. Event Log Page
Table 5. Event Log Menu Option
Option Description
Time Shows the local time of a log event.
Priority Shows the priority level of an event.
Description Shows detailed information of an SNMP event.

32