User manual

7 Now you need to set up each of your wireless devices with the SSID.

a First, make sure that the device's wireless capability is switched on. (Many

notebooks have a switch for wireless, for instance.)

b Next go to the device’s area for configuring a wireless network connection. (If you

need them, tips for finding this area are in

Appendix A.)

• For a Windows computer, click the Wireless Networking icon at the

lower right corner of the screen.

• For another device such as an iPhone or iPad, you may have to click on

something like Settings and then WiFi. Skip (c) and continue with (d)

below.

c Select the Site Survey or Scan option to see a list of the access points in your area.

That list should include the SSID ZOOM or the SSID you created.

d Select ZOOM (or the SSID you created).

That’s it! You have now disabled security.

If you are like most users, you don’t need to read further in this manual. You do want to read further

if you are a network administrator or if you are using the Cable Modem/Router with Wireless-N for

gaming or something else that requires special settings.

You can skip to specific sections of this User Manual based on your intended use of the Cable

Modem/Router with Wireless-N. Each of the menu options in your Configuration Manager is

covered as a separate chapter in the remaining portion of the User Manual. Refer to the chart on the

next page to go to a specific menu option.

