User manual
5 From the WEP Encryption drop-down menu, select WEP-64 bit (or WEP-128 bit for more
security).
6 For Network Key 1, you can either enter your own WEP Key or you can have WEP Keys
generated.
If you are entering a network key of your choice, enter 13 ASCII characters or 26 hexadecimal
digits for 128-bit encryption keys. Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit
encryption keys.
Otherwise, type something into the text box and click on Generate WEP Keys and WEP Keys
will automatically be generated for you.
Caution! Do not click Apply until you have entered WEP Keys.
7 Click Apply.
Every wireless network client needs to be set individually. Open the wireless configuration software
that came with the device, which should be running on the computer where the device is installed.
(Tips for finding the wireless configuration section of your device can be found in
Appendix A.)
Find the configuration menu for security, choose WEP, and enter the Network Key, exactly as you
entered it or exactly as it was generated for you on the Cable Modem/Router Wireless page.
Your security setup configuration is now complete!
Disabling Security
If for some reason you need to set up an unsecured network, you will need to disable the default
security that is currently set up for your cable modem/router. Follow the instructions below.
1 Open the Zoom Configuration Manager by typing the following in your Web browser's address
bar:
http://192.168.0.1
2 In the Enter Network Password dialog box, type the following User Name and Password in
lower case, then click OK..
User Name: admin
Password: admin
(The User Name and Password entered here are not the same as the User Name and Password
that your Internet service provider may have given you.)
3 Click Wireless on the top menu.
4 Then click Primary Network on the left-side menu and in the text box labeled Network Name
(SSID), type an SSID of your choice. The SSID needs to be at least one character long, and it’s
probably best to pick a name that you’ll recognize as yours.
5 Set all the following drop-down menus to Disable: WPA, WPA-PSK, WPA2, and WPA2-PSK.
6 Click Apply.
19