Specifications

ZOOM BFX-708
Adjusts effect tone.
Regardless of the MODE parameter setting of the PEDAL
module ( p. 20), this effect type causes the same
operation as "UP".
This effect produces a metallic sound.
Selects connection order of COMP•DIST module and MOD
module.
Sets frequency for ring modulation effect. The tone changes
considerably depending on the frequency setting.
Adjusts balance between effect sound and direct sound.
This effect automatically creates a "violin playing" sound
depending on the picking intensity.
Selects connection order of COMP•DIST module and MOD
module.
Adjusts attack speed.
Adjusts attack curve.
Allows creating a fretless bass sound from any bass guitar.
Should be used with single notes.
Adjusts sensitivity for effect triggering.
Adjusts attack speed.
Adjusts amount of sound decay.
This is a ping-pong delay with a delay time of up to 500 ms
(milliseconds).
Adjusts delay time in 10-ms steps.
Adjusts feedback amount. Higher values result in more delay
repetitions.
This effect produces a soft echo similar to a tape echo.
Adjusts delay time in 10-ms steps.
Adjusts feedback amount.
This is a new kind of delay effect which varies the delay time
according to the picking intensity.
Adjusts effect sensitivity.
Adjusts feedback amount.
Adjusts balance between effect sound and direct sound.
This is a combined tremolo and chorus effect.
Adjusts tremolo effect speed.
Adjusts chorus modulation speed.
Adjusts chorus mix.
This is a vibrato effect.
Adjusts effect depth.
Adjusts effect speed.
Adjusts balance between effect sound and direct sound.
This effect simulates the sound of a bass synthesizer. Should be
used with single notes.
Adjusts effect depth.
Adjusts trigger detection sensitivity.
Adjusts balance between effect sound and direct sound.
The amp simulator is not active for the bass synthesizer effect.
SYNTH (Bass Synthesizer)
TYPE 20
VIBE
TYPE 19
TRMCHO (Tremolo/Chorus)
TYPE 18
T-TRIP (Time Trip)
TYPE 17
ECHO
TYPE 16
DELAY
TYPE 15
DEFRET
TYPE 14
SLOW-A (Slow Attack)
TYPE 13
RING-M (Ring Modulator)
TYPE 12
19
Effect Types and Parameters
REV (Reverb) module
Besides reverb and delay effects, this module also contains sophisticated jam effects using latest sampling technology.
This is a reverb effect which simulates the acoustics of a concert
hall.
* TYPE 1 and 2 parameters are identical.
Adjusts reverb duration (reverb time).
Adjusts effect tone.
Adjusts effect mix.
This is a reverb effect which simulates the acoustics of a room.
This is a ping-pong delay effect with a duration of up to 1.5
seconds.
Adjusts delay time from 10 ms to 990 ms in 10-ms steps.
(1 - 99), and over 1 second in 100-ms steps (1.0 - 1.5).
Adjusts feedback amount.
Adjusts effect mix.
PP-DLY (Ping-Pong Delay)
TYPE 3
ROOM
TYPE 2
HALL
TYPE 1
POSI AF, bFParameter 1
RATE 1 – 30Parameter 2
BAL 0 – 30Parameter 3
POSI AF, bFParameter 1
TIME 1 – 30Parameter 2
CURVE 1 – 10Parameter 3
SENS 1 – 16Parameter 1
ATTACK 1 – 10Parameter 2
SINK 1 – 10Parameter 3
TIME 1 – 30Parameter 1
TIME 1 – 99, 1.0 – 1.5Parameter 1
TONE 0 – 10Parameter 2
MIX 0 – 30Parameter 3
SENS 1 – 50Parameter 1
FB -10 – 10Parameter 2
BAL 0 – 30Parameter 3
TRMRAT 1 – 30Parameter 1
CHORAT 1 – 30Parameter 2
CHOMIX 0 – 30Parameter 3
DEPTH 0 – 10Parameter 1
RATE 1 – 30Parameter 2
BAL 0 – 30Parameter 3
VARI 1 – 5Parameter 1
SENS 1 – 16Parameter 2
BAL 0 – 30Parameter 3
NOTE
FB 0 – 10Parameter 2
MIX 0 – 30Parameter 3
NOTE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
-100 cent
Original sound only
DOUBLING
Detune + DRY
0 cent
+1 octave
0 cent
-1 octaves
-1 octave + DRY
+1 octave + DRY
-700 cent + DRY
500 cent + DRY
- ∞ (0 Hz) + DRY
+1 octave
- ∞ (0 Hz) + DRY
+1 octave + DRY
Original sound only
-100 cent
Detune + DRY
DOUBLING
+1 octave
0 cent
-1 octaves
0 cent
+1 octave + DRY
-1 octave + DRY
500 cent + DRY
-700 cent + DRY
+1 octave
- ∞ (0 Hz) + DRY
+1 octave + DRY
- ∞ (0 Hz) + DRY
Pedal
minimum value
Pedal
maximum value
P-PIT
TYPE
TONE 0 – 10Parameter 2
TIME 1 – 50Parameter 1
TIME 1 – 50Parameter 1
FB 0 – 10Parameter 2
MIX 0 – 30Parameter 3
FB 0 – 10Parameter 2
MIX 0 – 30Parameter 3