Specifications
Tutorial 2: Working with Data 51
2.
This button works as a toggle you can toggle on or off the Voxel box.
TO DISPLAY VOXEL GRID LINES:
1.
Click the display Voxel grid lines ( ) button and the Voxel colour shading will
be removed/added and the Voxel grid/Voxel colour fill will be displayed.
2. This button works as a toggle you can toggle on or off the Voxel grid lines or
colour shading.
TO DISPLAY VOXEL CONTROLS DIALOG:
1.
Click the Voxel controls ( ) button and the Voxel Controls dialog will be
displayed.
2. Using either the slider bars or the corresponding value boxes, specify the Data
Range, X Range, Y Range and Z Range values for your Voxel display.
3. Click the [OK] button and the Voxel will be updated with the new data ranges.
TO SPECIFY THE TRANSPARENCY OF THE VOXEL:
1.
Move the Transparency slider bar from right to left to increase the transparency.
TO INTERACTIVELY MODIFY DATA RANGE:
1.
Using the slider bars specify the Data range and the Voxel will be updated
simultaneously.
Note: If you specify new Data ranges by specifying values in the data boxes, you
must press the <Enter> key to update the Voxel.
TO INTERACTIVELY MODIFY MY X, Y, Z RANGES:
1.
Using the slider bars specify the X, Y, Z ranges and the Voxel displayed in the 3D
Viewer will be updated simultaneously.
3D Rendering Memory Requirements
You can adjust the rendering resolution for 3D Views on the 3D Con tab. The controls on
this tab are system controls and changes made to this tab will affect all 3D maps in your
Oasis Montaj system.
The 3D Views rendering process makes heavy use of the available memory on your video
card, and performance will be substantially reduced if your limits are exceeded.
Full render resolution:
When the full render resolution is set to maximum it can easily consume hundreds of
megabytes of memory (200-600 Mb). If you do not have adequate memory available your
computer will start to thrash, your hard drive light will turn on and stay on and the
rendering will take a very long time. If you have less than 256 Mb of RAM, you should
not increase this control.