Specifications

44 Tutorial 2: Working with Data
- enables you to modify the overall view of the 3D View on a map
- enables you to modify the individual planes within each 3D View
- enables you to add labels, axis, and a box around the 3D View
- enables you to adjust the rendering resolution in the 3D tool
- enables you to modify the voxel display parameters in the 3D tool
View Tab
The View tab enables you to:
• Rotate your 3D View 360
degrees in all directions
• Zoom in and out of the
displayed View
• Use the Pan tool
• Centre the displayed View
(reset focus point of the View)
• Modify the brightness level
• Specify and fix the inclination
of the View
• Specify and fix the declination
of the View
• Specify the viewing distance
from the central focal point of
the View
TO ROTATE THE 3D GRID:
When you select the Rotate button the curser changes to the rotate mode, and enables you
to rotate the displayed grid 360 degrees in all directions.
1. Select the Rotate button. The curser changes to rotate mode ( )
2. Left click, and while holding down on the mouse key move right to left or up and
down. The grid will rotate in the direction in which you move the mouse.
Note: Moving the mouse from left to right turns the grid in an anti-clockwise
direction, and moving right to left turns the image in a clockwise direction.
TO ZOOM THE 3D GRID:
When you select the Zoom button the curser changes to the zoom mode, and enables you
to zoom in and out of the displayed grid.
1. Select the Zoom button. The curser changes to zoom mode ( ).